Griblet

Guide

How to read a GRIB forecast

A GRIB file is a weather model forecast as numbers on a grid: wind, pressure, waves and more at points spread evenly over the sea, every few hours. Here is how to read what Griblet draws from one, and what no GRIB can tell you.

Wind: colours, streaks and barbs

The colours show the wind speed in knots; the map key (press K) says which colour is which. The moving streaks follow the wind and run faster where it blows harder. Wind is always named for where it comes from: a southwesterly blows from the southwest.

Wind barbs (in the layers menu) are how forecasters write it. The staff points into the wind, the way a weathervane would. Add up the feathers on its end: a half barb is 5 knots, a full barb 10, a pennant 50. A circle is calm.

Calm
5 kt
15 kt
25 kt
65 kt
Wind barbs from the north: calm, 5, 15, 25 and 65 knots.

Waves are the other way round: the wave direction arrows and moving crests show where the waves are going. Wave height in a GRIB is the significant height, roughly the average of the highest third of the waves. Expect single waves up to about twice that.

Isobars: where the wind comes from

Isobars join places with the same sea-level pressure. Griblet draws one every 4 hPa and marks the highs (H) and lows (L).

The closer the lines, the stronger the wind. Lines half as far apart mean roughly twice the wind. A tight bunch of isobars a day ahead is a gale on its way, whatever the colours say about the hours before it.

The wind blows along the isobars, turned in towards the low by 10–20° over the sea: anticlockwise round a low and clockwise round a high in the northern hemisphere, the other way round in the southern. With your back to the wind in the northern hemisphere, the low is on your left (on your right south of the equator).

Watch the trend as much as the numbers. Pressure falling a few hPa in three hours means the wind is coming; the spot forecast (tap the sea) shows how it changes over the days.

Grid spacing: why 0.25° shows more than 1°

A model only knows the weather at its grid points. A quarter of a degree of latitude is 15 nautical miles; a whole degree is 60. Everything between two points is drawn in between, not forecast.

On a 1° grid a headland, a strait or the lee of an island falls between the points and disappears: the wind looks smooth, and is often too light near the coast. A 0.25° grid catches the bigger coastal features, but still not a harbour entrance or the gust funnelling down a valley.

Griblet fetches the sea areas at 0.25° where they are small enough, and the whole world at 1°. Zoom in on the world and it loads the detail for the water in view. Time works the same way: steps are often three hours apart or more, and a squall or a wind shift between two steps is not in the file.

What a model cannot tell you

Gusts. The gust in a GRIB is the model estimate of the strongest gusts from the mean wind and how unsettled the air is. Under a shower cloud they can be far stronger.

Squalls and thunderstorms. They are too small for the grid. The model can say the air is unstable (high storm energy, or CAPE) and that it is raining hard, which is where Griblet puts a squall watch mark, but never where one squall will be.

Local effects. Sea breezes, wind bending round headlands and funnelling between islands, cold air pouring off the land at night, and wind against tide, which makes the sea far steeper than its height says.

Timing. Fronts and lows can arrive hours early or late, more so a few days out. When two models disagree, trust neither too much: Griblet can show GFS and ECMWF side by side on any sea area to see where they part ways.